Netgear GS108T GS108T Setup Manual - Page 53
Server, UDP Port, Facility, Description, Minimum Severity, for logging.
![]() |
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
GS108T Smart Switch Software Administration Manual . Figure 3-22 The following information is available for each server log: • ID: ID of the server log given by the system. • Server: IP Address of the remote server. • UDP Port: UDP port number to connect with the server. • Facility: Type of facility. • Description: Description of server log. • Minimum Severity: All levels of severity above this minimum severity will be included for logging. 2. Add or remove server logs on the Server Logs list. Adding a server log to the Server Logs list a. Click Add on the Server Logs screen. A screen similar to that shown below appears. Managing System Settings v1.0, May 2007 3-29
![](/manual_guide/products/netgear-gs108t-gs108t-setup-manual-1-18acb17/53.png)
GS108T Smart Switch Software Administration Manual
Managing System Settings
3-29
v1.0, May 2007
.
The following information is available for each server log:
•
ID
: ID of the server log given by the system.
•
Server
: IP Address of the remote server.
•
UDP Port
: UDP port number to connect with the server.
•
Facility
: Type of facility.
•
Description
: Description of server log.
•
Minimum Severity
: All levels of severity above this minimum severity will be included
for logging.
2.
Add or remove server logs on the Server Logs list.
Adding a server log to the Server Logs list
a.
Click
Add
on the Server Logs screen. A screen similar to that shown below appears.
Figure 3-22