Netgear GS108T GS108T Setup Manual - Page 56
Speed, Flow Control, Link Status, Default Priority, Port Description
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
GS108T Smart Switch Software Administration Manual . Figure 4-24 The following port configuration settings are displayed for all of the ports: • ID indicates the port number. • Speed indicates duplex speed for the port. • Flow Control indicates whether flow control on or off. - When the flow control for a port is enabled, it would send out a pause frame or a jam packet if it is over-subscribed. - When this port receives a pause frame, it halts for a certain period before sending out a frame. • Link Status: Indicates whether the link is up/down. • Default Priority indicates the packet priority for packets arriving at the port without tagging. If the packet comes in with tag or priority-tag, the priority is retrieved from the priority field of the tag. • Port Description: Provides a description of the port. 2. To change a port, select the port number. A screen similar to that shown below appears. 4-2 Configuring the Switch v1.0, May 2007