Netgear GS108T GS108T Setup Manual - Page 86
Properties, Port-based Authentication State, Enable, Disable, Authentication Method, RADIUS
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
GS108T Smart Switch Software Administration Manual Properties The Network Authentication Properties page allows network managers to configure port authentication parameters. Guest VLANs are also enabled from the Network Authentication Properties page. 1. Click Properties in the blue navigation panel. A screen similar to that shown below appears. . Figure 4-51 2. The Port Authentication Properties Page contains the following fields: • Port-based Authentication State: Indicates if Port Authentication is enabled on the device. The possible field values are: - Enable: Enables port-based authentication on the device. - Disable: Disables port-based authentication on the device. • Authentication Method: Specifies the authentication method used for port authentication. The possible field values are: - None: Indicates that no authentication method is used to authenticate the port. - RADIUS: Provides port authentication using the RADIUS server. 4-32 v1.0, May 2007 Configuring the Switch