Netgear JWNR2000v2 JWNR2000 User Manual - Page 27

Wireless Settings, Name SSID, Up to 145Mbps, The default SSID is NETGEAR. - problem

Get Netgear JWNR2000v2 PDF manuals and user guides View all Netgear JWNR2000v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

NETGEAR Wireless-N 300 Router JWNR2000 User Manual 1. Select Wireless Settings under Setup in the main menu of the JWNR2000 router. Figure 1-9 2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR. Note: The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the SSID of any wireless access adapters must match the SSID you specify in the JWNR2000 router. If they do not match, you will not get a wireless connection to the JWNR2000 router. 3. Select the region in which the wireless interface will operate. 4. Set the channel. The default channel is Auto. This field determines which operating frequency is used. It should not be necessary to change the wireless channel unless you notice interference problems with another nearby wireless router or access point. Select a channel that is not being used by any other wireless networks within several hundred feet of your router. For more information about the wireless channel frequencies, click the link to the online document "Wireless Networking Basics" in Appendix B. 5. Make sure that the mode is set to Up to 145Mbps. Configuring Basic Connectivity v1.0, September 2009 1-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
NETGEAR Wireless-N 300 Router JWNR2000 User Manual
Configuring Basic Connectivity
1-11
v1.0, September 2009
1.
Select
Wireless Settings
under Setup in the main menu of the JWNR2000 router.
2.
For the wireless network name (SSID), use the default name, or choose a suitable descriptive
name. In the
Name (SSID)
field, you can enter a value of up to 32 alphanumeric characters.
The default SSID is NETGEAR.
3.
Select the region in which the wireless interface will operate.
4.
Set the channel. The default channel is
Auto
.
This field determines which operating frequency is used. It should not be necessary to change
the wireless channel unless you notice interference problems with another nearby wireless
router or access point. Select a channel that is not being used by any other wireless networks
within several hundred feet of your router. For more information about the wireless channel
frequencies, click the link to the online document
“Wireless Networking Basics” in
Appendix B
.
5.
Make sure that the mode is set to
Up to 145Mbps
.
Figure 1-9
Note:
The SSID is case-sensitive; NETGEAR is not the same as nETgear. Also, the
SSID of any wireless access adapters must match the SSID you specify in the
JWNR2000 router. If they do not match, you will not get a wireless connection
to the JWNR2000 router.