Netgear JWNR2000v2 JWNR2000 User Manual - Page 91
Port Triggering, Disable Port Triggering, Port Triggering Timeout, has terminated.
View all Netgear JWNR2000v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2. Select the Port Triggering radio button. The port triggering information displays. Figure 5-4 3. Clear the Disable Port Triggering check box. Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled. However, any port triggering configuration information you added to the router is retained even though it is not used. 4. In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. This is required because the router cannot be sure when the application has terminated. Fine-Tuning Your Network v1.0, September 2009 5-11