Netgear M4100-26G Software Administration Manual - Page 271

ProSafe M4100 and M7100 Managed Switches A screen similar to the following displays. b. Under Port Security Configuration, next to Port Security Mode, select the Enable radio button. c. Click Apply to save the settings. 2. Set the dynamic and static limit on the port 1/0/1: a. Select Security > Traffic Control > Port Security >Interface Configuration. A screen similar to the following displays. b. Scroll down and select the Interface 1/0/1 check box. Now 1/0/1 appears in the Interface field at the top. c. Enter the following information: • In the Port Security field, select Enable. • In the Max Allowed Dynamically Learned MAC field, enter 10. • In the Max Allowed Statically Locked MAC field, enter 3. d. Click Apply to save the settings. Convert the Dynamic Address Learned from 1/0/1 to a Static Address The example is shown as CLI commands and as a Web interface procedure. Chapter 15. Security Management | 271