Netgear M4100-26G Software Administration Manual - Page 46

ProSafe M4100 and M7100 Managed Switches Assign Private-VLAN Types (Primary, Isolated, Community) The example is shown as CLI commands and as a Web interface procedure. CLI: Assign Private-VLAN Type (Primary, Isolated, Community) Use the following commands to assign VLAN 100 to primary VLAN, VLAN 101 to isolated VLAN, and VLAN 102 to community VLAN. (Netgear Switch) #config (Netgear Switch) (Config)#vlan 100 (Netgear Switch) (Config)(Vlan) #private-vlan primary (Netgear Switch) (Config)(Vlan) #exit (Netgear Switch) (Config)#vlan 101 (Netgear Switch) (Config)(Vlan) #private-vlan isolated (Netgear Switch) (Config)(Vlan) #exit (Netgear Switch) (Config)#vlan 102 (Netgear Switch) (Config)(Vlan) #private-vlan community (Netgear Switch) (Config)(Vlan) #end Web Interface: Assign Private-VLAN Type (Primary, Isolated, Community) 1. Create VLAN 10. a. Select Security > Traffic Control > Private VLAN > Private VLAN Type Configuration. A screen similar to the following displays. b. Under Private VLAN Type Configuration, select the VLAN ID 100 check box. Now 100 appears in the interface field at the top. c. In the Private VLAN Type field, select Primary from the pull-down menu. d. Click Apply to save the settings 46 | Chapter 2. VLANs