Netgear M4100-26G Software Administration Manual - Page 83
ProSafe M4100 and M7100 Managed Switches, Enable RIP for the switch.
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
ProSafe M4100 and M7100 Managed Switches (Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#vlan port tagging all 10 (Netgear Switch) (Config)#vlan port tagging all 20 (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#vlan participation include 10 (Netgear Switch) (Interface 1/0/2)#vlan pvid 10 (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#vlan participation include 20 (Netgear Switch) (Interface 1/0/3)#vlan pvid 20 (Netgear Switch) (Interface 1/0/3)#exit (Netgear Switch) #config (Netgear Switch) (Config)#interface vlan 10 (Netgear Switch) (Interface vlan 10)#ip address 192.150.3.1 255.255.255.0 (Netgear Switch) (Interface vlan 10)#exit (Netgear Switch) (Config)#interface vlan 20 (Netgear Switch) (Interface vlan 20)#ip address 192.150.4.1 255.255.255.0 (Netgear Switch) (Interface vlan 20)#exit 2. Enable RIP for the switch. The route preference defaults to 15. (Netgear Switch) (Config)#router rip (Netgear Switch) (Config router)#enable (Netgear Switch) (Config router)#exit 3. Configure the IP address and subnet mask for a nonvirtual router port. (Netgear Switch) (Config)#interface 1/0/5 (Netgear Switch) (Interface 1/0/5)#ip address 192.150.5.1 255.255.255.0 (Netgear Switch) (Interface 1/0/5)#exit 4. Enable RIP for the VLAN router ports. Authentication defaults to none, and no default route entry is created. (Netgear Switch) (Config)#interface vlan 10 (Netgear Switch) (Interface vlan 10)#ip rip (Netgear Switch) (Interface vlan 10)#exit (Netgear Switch) (Config)#interface vlan 20 (Netgear Switch) (Interface vlan 20)#ip rip (Netgear Switch) (Interface vlan 20)#exit (Netgear Switch) (Config)#exit Chapter 6. RIP | 83