Netgear PTV2000 PTV2000 User Manual - Page 18

Push2TV HD TV Adapter for Intel® Wireless Display User Manual Your Video Mode Has Changed The video display resolution might change while you are using Intel Wireless Display. This can happen regardless of whether you change the display resolution manually or it is changed by another application. On the Your Video Mode has Changed screen, click the Restore settings and resume connection button to allow the application to automatically reset the display to the correct settings. Selecting Keep settings and close connection results in the display session ending. Intel Wireless Display supports at least one or more of the following resolutions: 1280 x720, 1280 x768, 1280 x 800, 1366 x 768, 1440 x 900, 1600 x 900, and 1920 x 1080. For information about viewing in HDTV 1080p resolution, see HDTV 1080p Resolution on page 14. Returning the Adapter to Its Original Firmware and Factory Settings This procedure erases the security code for your adapter. After you do this, you will have to set the adapter up again to work with your TV and your laptop as described in the installation guide. This procedure also removes any firmware updates that you have installed. To return the adapter to its original firmware level and its default settings: 1. Turn off the adapter by pushing the On/Off button on the rear panel. 2. Press and hold the Restore Factory Settings button. 3. While you continue to hold the Restore Factory Settings button, press the On/Off button to turn the adapter back on. 4. Wait until the LED on the front flashes, then release the Restore Factory Settings button. The adapter returns to its original firmware level and its default settings. 18 | Chapter 3. Troubleshooting