Home » Netgear Manuals » Wireless » Netgear WBC502 » Manual Viewer

Netgear WBC502 Hardware Installation Guide - Page 13

Back panel with status LEDs

Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Insight Instant AirBridge WBC502 Hardware Installation Guide Back panel with status LEDs The back panel of the AirBridge shows the status LEDs. The following figure shows the back panel of the AirBridge. Figure 2. Back panel The following table describes the status LEDs on the back panel. Hardware Overview 13 Hardware Installation Guide

Section	Page
Contents	3
1. Introduction	5
Overview	6
Features	7
Safety instructions and warnings	8
2. Hardware Overview	11
Front panel	12
Back panel with status LEDs	13
Bottom panel with Ethernet ports	15
Power adapter	16
RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity	17
Reset button	18
3. Applications	19
Applications overview	20
Extend your network to a detached site	21
Provide a WiFi Internet connection to a detached, independent network	23
Centrally manage video surveillance networks located at different sites	25
Provide long-range WiFi service to outdoor clients	27
Provide a WiFi connection to an outdoor device that is not WiFi-capable	29
4. Installation	31
Step 1: Determine the site-to-site distance or required coverage area	32
Step 2: Prepare the site	34
Step 3: Unpack the AirBridge	35
Step 4: Set up the WiFi connection between a master and a satellite	36
Step 4a: Set up the WiFi connection on the master at the main site	36
Step 4b: Set up and establish the WiFi connection on the satellite at the main site	37
Step 4c: Reestablish the WiFi connection on the satellite at the detached site	39
Step 5: Mount the AirBridge	40
Mount the AirBridge to a wall	40
Mount the AirBridge to a pole	41
Step 6: Manage the AirBridge and WiFi network	42
5. Hardware troubleshooting	43
Hardware troubleshooting chart	44