Netgear WBC502 Hardware Installation Guide - Page 18
Reset button - firmware
View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Insight Instant AirBridge WBC502 Hardware Installation Guide Reset button The AirBridge provides a recessed Reset button on the bottom panel so that you can return the AirBridge to its factory default settings, causing all custom settings to be erased. Note: To return the AirBridge to factory default settings, you can also access the local browser UI and use the software Reset button. For more information, see the user manual, which you can download by visiting netgear.com/support/download/. To return the AirBridge to its factory default settings: 1. Remove the cover from the bottom panel to access the Reset button. 2. Insert a device such as a straightened paper clip into the opening of the Reset button. 3. Press the Reset button for at least 10 seconds, or until the Power LED starts to blink. The AirBridge restarts and returns to factory default settings. WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset. Do not turn off the AirBridge. Wait until the AirBridge finishes restarting. Hardware Overview 18 Hardware Installation Guide