Netgear WBC502 Hardware Installation Guide - Page 41

Mount the AirBridge to a pole

Get Netgear WBC502 PDF manuals and user guides View all Netgear WBC502 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Insight Instant AirBridge WBC502 Hardware Installation Guide To mount the AirBridge to a wall: 1. Using screw placement guide, mark the location for the holes on the wall where you want to mount the AirBridge. The holes must be 2.13 in. (54 mm) apart, center to center. 2. Drill holes into the wall for the two anchors in which you will insert the M3 x L16 mm screws. The screws and anchors are in a plastic bag in the package. 0 0 1 1 2 2 3 3 4 4 5 5 3. Insert the anchors into the wall and tighten the screws with a No. 2 Phillips screwdriver. Leave about ¼ inch (6 mm) of each screw protruding from the wall so that you can insert the screws into the holes on the back panel of the AirBridge. 4. Line up the holes on the back panel of the AirBridge with the screws in the wall and mount the AirBridge to the wall. Mount the AirBridge to a pole The back panel of the AirBridge provides an opening for the strap for pole mounting. The AirBridge package includes a pole-mounting strap. To mount the AirBridge to a pole: 1. Using a screwdriver, open the supplied pole-mounting strap. Installation 41 Hardware Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
To mount the AirBridge to a wall:
1.
Using screw placement guide, mark the location for the holes on the wall where you
want to mount the AirBridge.
The holes must be 2.13 in. (54 mm) apart, center to center.
2.
Drill holes into the wall for the two anchors in which you will insert the M3 x L16 mm
screws.
The screws and anchors are in a plastic bag in the package.
0
1
2
3
4
5
0
1
2
3
4
5
3.
Insert the anchors into the wall and tighten the screws with a No. 2 Phillips screwdriver.
Leave about ΒΌ inch (6 mm) of each screw protruding from the wall so that you can
insert the screws into the holes on the back panel of the AirBridge.
4.
Line up the holes on the back panel of the AirBridge with the screws in the wall and
mount the AirBridge to the wall.
Mount the AirBridge to a pole
The back panel of the AirBridge provides an opening for the strap for pole mounting.
The AirBridge package includes a pole-mounting strap.
To mount the AirBridge to a pole:
1.
Using a screwdriver, open the supplied pole-mounting strap.
Hardware Installation Guide
41
Installation
Insight Instant AirBridge WBC502 Hardware Installation Guide