Netgear WC7500 User Manual - Page 255

ProSAFE Wireless Controller 5. Enable SNMP and configure the settings as described in the following table. Setting Description SNMP Select the SNMP check box to enable SNMP for the wireless controller. Read-Only Community Name Enter the community string that allows the SNMP manager to read the wireless controller's MIB objects. The default setting is public. Read-Write Community Name Enter the community string that allows the SNMP manager to read and write the wireless controller's MIB objects. The default setting is private. Trap Community Name IP Address to Receive Traps Trap Port SNMP Manager IP Enter the community name that is associated with the IP address to receive traps. The default setting is trap. Enter the IP address at which the SNMP manager receives traps sent from the wireless controller. Enter the port on which the SNMP manager receives traps sent from the wireless controller. The default setting is port 162. Enter the IP address of the SNMP manager. To allow any SNMP manager to access the wireless controller, keep this field blank. 6. Click the Apply button. The changes are saved. Specify Session Time-Outs If an HTTP session times out, the user is redirected to the login page for password verification.  To specify the length of the HTTP session time-out for the wireless controller: 1. Open a web browser. In the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Maintenance > Remote Management > Session Timeout. Maintain the Wireless Controller and Access Points 255