Netgear WC7500 User Manual - Page 326

ProSAFE Wireless Controller The following table describes the fields of the Clients page. Item Select MAC IP Location AP-Name AP-IP AP-MAC Client Type Description The radio button that lets you select the client. The MAC address of the WiFi client. The IP address of the WiFi client. Note the following: • If clients and the access point to which they are connected are in the same VLAN, all receive an IP address from the same DHCP server. • If clients and the access point to which they are connected are not in the same VLAN, you must provide a DHCP server for the client VLAN. • If clients are not connected to any DHCP server, IP addresses in the 169.254.x.x. range are assigned automatically. The location of the access point (see Change Access Point Information on the Managed AP List on page 168) to which the WiFi client is connected. The name of the access point (see Change Access Point Information on the Managed AP List on page 168) to which the WiFi client is connected. The IP address of the access point to which the WiFi client is connected. The MAC address of the access point to which the WiFi client is connected. The wireless mode that the WiFi client is using to connect to the access point (802.11ng, 802.11bg, 802.11b, 802.11ac, 802.11na, or 802.11a). Monitor the WiFi Network and Its Components 326