Netgear WC7500 User Manual - Page 94
Login, Configuration > System > General, Apply, Untagged VLAN, Manage the Time Settings
View all Netgear WC7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
ProSAFE Wireless Controller 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Configuration > System > General. The General Settings page displays. 5. Enter a name for the wireless controller and select the country in which the wireless controller is used. 6. Click the Apply button. The changes are saved. 7. Select Configuration > System > Time. The Time Setting page displays. 8. Select the time zone in which the wireless controller is used. Optionally, configure the NTP settings. For more information, see Manage the Time Settings on page 100. 9. Click the Apply button. The changes are saved. 10. Select Configuration > System > IP/VLAN. The IP Settings page displays. 11. Enter the IP settings for your network and the VLANs that you want to assign to the wireless controller. Note: A management VLAN is used for all SNMP and HTTP traffic to and from the wireless controller and managed access points. Note: Clear the Untagged VLAN check box only if the hubs and switches in your network support the VLAN (802.1Q) standard. Likewise, change the untagged VLAN value only if the hubs and switches in your network support the VLAN (802.1Q) standard. For more information, see Manage the IP, VLAN, and Link Aggregation Settings on page 101. 12. Click the Apply button. The changes are saved. 13. If your network does not include a DHCP server, configure the wireless controller's DHCP server. For more information, see Manage the DHCP Server on page 105. 14. Click the Apply button. The changes are saved. Installation and Configuration Overview 94