Netgear WGPS606 WGPS606 User Manual - Page 13
Autosensing Ethernet Connections with Auto Uplink, System Requirements - manual
UPC - 606449039542
View all Netgear WGPS606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch Autosensing Ethernet Connections with Auto Uplink The WGPS606 can connect to a standard Ethernet network. The LAN interface is autosensing and capable of full-duplex or half-duplex operation. The wireless USB print server incorporates Auto UplinkTM technology. The Ethernet port will automatically sense whether the Ethernet cable plugged into the port should have a 'normal' connection such as to a PC or an 'uplink' connection such as to a switch or hub. That port will then configure itself to the correct configuration. This feature also eliminates any concerns about crossover cables, as Auto Uplink will accommodate either type of cable to make the right connection. System Requirements Before installing the WGPS606, make sure your network meets these requirements: • A 100-240 V, 50-60 HZ AC power source • A Web browser for configuration such as Microsoft Internet Explorer 5.0 or above, or Netscape Navigator 4.78 or above • At least one Pentium class computer (or equivalent) with the TCP/IP protocol installed and a CD-ROM drive • An 802.11b or 802.11g-compliant router or access point Introduction 2-3 202-10083-01