Netgear WGPS606 WGPS606 User Manual - Page 18
Verify Printer and Network Readiness - static ip
UPC - 606449039542
View all Netgear WGPS606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Reference Manual for the NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch Network Setting Default Factory Setting IP Address Provided automatically via DHCP for initial setup but will be set to Static IP by the Smart Wizard during initial setup for regular operation Before you begin, gather your existing network settings such as the TCP/IP addresses and networking protocols in use. Verify Printer and Network Readiness Assure that the following are available: • You have a working Ethernet network running TCP/IP with at least one Windows 98SE, Me, 2000, or XP PC. • You have a printer with a USB port. Note: The NETGEAR 54 Mbps Wireless USB Print Server with 4-Port Switch WGPS606 does not support printers using parallel connectors. If your printer uses a parallel connector, you should use one of the other NETGEAR Print Servers such as the Model PS101 Mini Print Server. • You may also need to have your printer driver software handy. For most popular printers, Windows already has the printer driver software available. Note: Set up the printer you will use directly on a computer and verify that it is working properly before connecting it to the WGPS606. 3-2 Basic Installation and Configuration 202-10083-01