Netgear WNDAP620 Reference Manual - Page 108
a/na, Table 31., Advanced wireless settings
View all Netgear WNDAP620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620 Figure 64. 2. Optional: To configure advanced wireless settings for the 802.11a/na modes, click the 802.11a/na tab. 3. Specify the settings as explained in the following table: Table 31. Advanced wireless settings Setting Description RTS Threshold (0-2347) Enter the Request to Send (RTS) threshold. The default setting is 2347. If the packet size is equal to or less than the RTS threshold, the wireless access point uses the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) mechanism, and the data frame is transmitted immediately after the silence period. If the packet size is larger than the RTS threshold, the wireless access point uses the CSMA with Collision Avoidance (CSMA/CA) mechanism. In this situation, the transmitting station sends an RTS packet to the receiving station and waits for the receiving station to return a Clear to Send (CTS) packet before sending the actual packet data. Fragmentation Length (256-2346) Enter the maximum packet size that is used for the fragmentation of data packets. Packets that are larger than the specified fragmentation length are broken up into smaller packets before being transmitted. The fragmentation length needs to be an even number. The default setting is 2346. Advanced Configuration 108