Netgear WNDAP620 Reference Manual - Page 46
Before You Change the SSID, WEP, and WPA Settings, Form for 802.11b/bg/ng Modes
View all Netgear WNDAP620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620 Before You Change the SSID, WEP, and WPA Settings For a new wireless network, print or copy one of the following forms and fill in the settings. For an existing wireless network, the network administrator can provide this information. Be sure to set the country or region correctly as the first step. Form for 802.11b/bg/ng Modes Print this page and store the security information in a safe place: • SSID: The service set identifier (SSID) identifies the wireless local area network. You can customize it by using up to 32 alphanumeric characters. Write your SSID on the line. SSID The SSID in the wireless access point is the SSID you configure on the wireless adapter card. All wireless nodes in the same network need to be configured with the same SSID. • WEP key size and authentication Choose the key size by circling one: 64, 128, or 152 bits. Choose the authentication type by circling one: open system or shared key. Passphrase Note: If you select shared key, the other devices in the network cannot connect unless they are set to shared key and have the same keys in the same positions as those in the wireless access point. • WPA-PSK (pre-shared key) and WPA2-PSK Record the WPA-PSK passphrase: WPA-PSK passphrase Record the WPA2-PSK passphrase: WPA2-PSK passphrase • WPA RADIUS settings For WPA, record the following settings for the primary and secondary RADIUS servers: Server name/IP address: Primary Secondary Port: Shared secret • WPA2 RADIUS settings For WPA2, record the following settings for the primary and secondary RADIUS servers: Server name/IP address: Primary Secondary Port: Shared secret End of Form Wireless Configuration and Security 46