Netgear WNDAP620 Reference Manual - Page 120
Enable Wireless Client Association, Table 36.
View all Netgear WNDAP620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620 e. If you want to enable wireless client association while the wireless access point functions as a point-to-point bridge, select the Enable Wireless Client Association check box. f. Click Edit to configure the security profile settings. The Edit Security Profile screen displays: Figure 69. g. Specify the settings as explained in the following table: Table 36. Point-to-point bridge profile and authentication settings Setting Description Profile Definition Profile Name Enter a profile name that is easy to remember. The default name is NETGEAR-WDS-1. Remote MAC Address Enter the MAC address of the remote wireless access point (the MAC address of AP2 on LAN Segment 1 in Figure 67 on page 119). Authentication Settings Network Authentication and Data Encryption From the Network Authentication drop-down list, select Open System, WPA-PSK, or WPA2-PSK. Your selection determines the options that the Data Encryption drop-down list provides, and whether the WPA Passphrase (Network Key) field displays. Advanced Configuration 120