Netgear WNDAP620 Reference Manual - Page 58
To con the RADIUS server settings
View all Netgear WNDAP620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP620 To configure the RADIUS server settings: 1. Select Configuration > Security > Advanced > Radius Server Settings. The Radius Server Settings screen displays. Figure 30. 2. Specify the settings as explained in the following table: Table 14. RADIUS server settings for IPv4 and IPv6 Setting Descriptions Radius Server Settings Primary IPv4 Address or Enter the IP address of the primary RADIUS server for Authentication Server IPv6 Address authentication. Port Enter the number of the UDP port on the wireless access point that is used to access the primary RADIUS server for authentication. The default port number is 1812. Shared Secret Enter the shared key that is used between the wireless access point and the primary RADIUS server during authentication. Wireless Configuration and Security 58