Netgear WNDR4700 Installation Guide - Page 2

You can use this diagram to cable and connect your router or follow the detailed instructions in this booklet. 1. Prepare your modem. 3. Insert a hard disk drive (optional). Unplug your modem. If it has a battery backup, remove the battery. When the router is turned off, install the hard disk drive as described in "Install an HDD (Optional)" on page 8. 2. Connect your modem. Plug in your modem. Put the battery back in. Then connect the modem to the router Internet port. DSL or Cable 4. Power on the router. Wait for the Power LED to turn green. Internet Power On/Off Modem Router Power On/Off 5. Connect a computer. You can use an Ethernet cable (not included) or connect wirelessly. 6. Launch a browser. NETGEAR genie displays to guide you through the installation. If you do not see genie, type www.routerlogin.net. Compliance Declarations of Conformity For complete DoC visit the NETGEAR EU Declarations of Conformity website at: http://support.netgear.com/app/answers/detail/a_id/11621/. This symbol is placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive. For indoor use only in all EU countries and Switzerland.