Nikon 25040 User Manual - Page 105
Putting Batteries in Your Camera, Deleting Images and Recordings
![]() |
UPC - 018208250400
View all Nikon 25040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Nothing happens when you release the shutter Indication: POWER lamp is off • The camera is off. Turn the camera on as described in "Turning the Camera On." Indication: The camera is in setup mode • Close the display cover to return the camera to recording mode. Indication: READY lamp is flickering • The camera is currently recording a picture or the flash is charging. If the camera is in single-frame mode, you should wait until the shutter release lamp glows steadily before taking a picture (see "Shutter Mode" and "Using the Flash"). Indication: Exposure count shows zero • There is not enough memory to record photographs at current settings. There may still be enough memory to record memos or a few seconds of sound data, and if image quality is currently set to "Fine" you may be able to record one or more photographs by changing the setting to "Normal" (see "Image Quality"). You will not however be able make a photograph at current settings until you have deleted one or more items from memory as described in "Deleting Images and Recordings from Memory." The flash doesn't work or takes more than thirty seconds to charge Indication: The flash icon in the settings list shows that the flash is set to "Off" ( ). • Set the flash to "Auto" or "On" before use. See "Using the Flash". Indication: Battery level is low • Select STATUS from the bottom of the main menu to bring up the status window (see "The Main Menu"). If the battery level is low, before using the flash you will need to replace the batteries as described in "Putting Batteries in Your Camera." Troubleshooting : General Problems 91
![](/manual_guide/products/nikon-25040-user-manual-e1ed8d9/105.png)