Nikon 25040 User Manual - Page 34

display window with the stylus., When in sleep mode, the touch-panel display can

Page 34 highlights

Note: To increase the life of the batteries, the camera will automatically enter "sleep" mode if no operations are performed for thirty seconds. When the camera enters "sleep" mode, the touch-panel display will turn off automatically but the POWER lamp will remain lit. If no operations are performed for a further two minutes, the camera will turn itself off automatically (this does not apply when the camera is being powered by the AC adaptor). When in sleep mode, the touch-panel display can be reactivated by half-pressing the shutter-release button or by touching the display window with the stylus. The touch-panel display also reactivates automatically whenever the record button is pressed. To turn the camera off, slide and release the ON/OFF switch as shown above. The touch-panel display will briefly show the word "GOOD-BYE" on a blue background while the camera shuts down. You can safely unplug the AC adaptor or exchange the batteries once the POWER lamp has gone off. Note: After turning the camera off, you will need to wait four or five seconds before you will be able to turn the camera on again. 20 First Steps : Turning the Camera On

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

20
First Steps : Turning the Camera On
Note:
To increase the life of the batteries, the camera will automatically
enter “sleep” mode if no operations are performed for thirty seconds.
When the camera enters “sleep” mode, the touch-panel display will turn
off automatically but the POWER lamp will remain lit.
If no operations
are performed for a further two minutes, the camera will turn itself off
automatically (this does not apply when the camera is being powered by
the AC adaptor).
When in sleep mode, the touch-panel display can be
reactivated by half-pressing the shutter-release button or by touching the
display window with the stylus.
The touch-panel display also reactivates
automatically whenever the record button is pressed.
To turn the camera off, slide and release the ON/OFF switch as shown
above.
The touch-panel display will briefly show the word “GOOD-BYE”
on a blue background while the camera shuts down.
You can safely unplug
the AC adaptor or exchange the batteries once the POWER lamp has gone
off.
Note:
After turning the camera off, you will need to wait four or five
seconds before you will be able to turn the camera on again.