Nikon 25040 User Manual - Page 39
Taking Your First Photograph, Turning the Camera On.
UPC - 018208250400
View all Nikon 25040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Taking Your First Photograph Once you have checked the battery level and set the time and date, you are ready to make your first recordings. This section gives a brief description of how to make a photograph after turning the camera on; more detailed information on changing the camera's settings may be found in the "Settings" chapter. For instructions on how to make memos or record sounds, refer "Creating Your First Memo" and "Making Your First Recording" immediately following this section. Step 1 - Turn the camera on Open the touch-panel display and turn the camera on as described above in "Turning the Camera On." Step 2 - Check the amount of memory remaining Once the camera has been turned on and has finished its initial check, the following status window will appear in the touch-panel display. FRI JAN 3.1997 22:10:32 BATTERY POWER 100% REMAINING MEMORY 100% PICTURES 66 COUNT SOUNDS 1017 SEC PICTURES 49 SET +SOUNDS OK Note: The above window will be displayed for about ten seconds after the camera has finished its initial check, after which time the camera will enter recording mode. To restore the status window, press the MENU button with the stylus and select STATUS from the lower right corner of the main menu. First Steps : Taking Your First Photograph 25