Nikon 25040 User Manual - Page 50
Remaining Memory, Sounds, Pictures + Sounds, Recording, From The Coolpix 300's Main Menu.
![]() |
UPC - 018208250400
View all Nikon 25040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
The amount of memory available for making further recordings is shown as a percentage next to the REMAINING MEMORY item. The number next to SOUNDS indicates how many seconds of audio data could be recorded were all the available memory used to store sound recordings. PICTURES + SOUNDS gives the number of photographs that could be made in combination with sound recordings if the camera were set to make audio recordings automatically whenever the shutter was released (see below for information on sound settings). If there is no memory available when the camera is turned on, or if the camera runs out of memory while making a recording, the camera will display a message warning you that memory is full (see "Troubleshooting"). When this happens, you will need to transfer the data in memory to a computer or delete all or some of the stored items before you will be able to record more audio data. Step 3 - Put the camera in recording mode You will need to put the camera in recording mode to choose a sound setting and record audio data. The camera enters recording mode automatically ten seconds after having been turned on, or when you use the stylus to select OK from the lower right corner of the status window (you can also make the camera enter recording mode by selecting RECORDING from the COOLPIX 300's main menu). When the camera is in recording mode, the READY lamp will glow steadily and the main display window in the touch-panel will show the view through the lens. Step 4 - Choose a sound setting As the default setting for the COOLPIX 300's audio recorder is "Off," you will need to change the sound settings before you will be able to record sounds. Using the stylus, touch the hand icon ( ) at the lower left corner of the main window of the touch panel display until the microphone icon ( ) is displayed in the settings list. Touch the microphone icon with the stylus to make changes to the camera's sound settings. Sound mode 36 First Steps : Making Your First Recording
![](/manual_guide/products/nikon-25040-user-manual-e1ed8d9/50.png)