Nikon SB 30 Instruction Manual - Page 29
Multiple flash shooting using cords, Multiple flash operation using the SB-30 as an infrared remote
UPC - 018208047185
View all Nikon SB 30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Multiple flash operation using the SB-30 as an infrared remote commander With the built-in infrared filter in place, you can use the SB-30 as an infrared remote commander Basic operation to perform wireless multiple flash, using slave flash units only to illuminate the subject without the use of a master flash unit. Slave • Set the flash mode to TTL auto flash; Non-TTL auto flash is not recommended. • The infrared filter can be used together with the Slave flash unit 1: SB-30 Main subject Infrared light Infrared light flash unit 2* wide-flash adapter. • Even though light leaks from both sides of the Infrared light Camera: SLRs or Digital E infrared filter, this will not affect the correct cameras, exposure. Master flash unit: SB-30 • Without using the infrared filter, the master flash unit works as a normal flash unit and the subject is also illuminated by this flash unit. * Any Speedlight compatible with TTL auto flash when mounted on the optional Wireless Slave Flash Controller SU-4. Multiple flash shooting using cords Like other Speedlights compatible with the TTL auto flash mode, the SB-30 can perform TTL multiple flash using optional TTL Remote Cords SC-17/SC-24, TTL Multi-Flash Sync Cords SC-18/SC-19, or the TTL Multi- Flash Adapter AS-10. For details, refer to your camera or accessory instruction manuals or brochures. 27