Nokia 002J3X4 User Manual - Page 160
WEP key settings, 802.1x security settings, WPA security settings
View all Nokia 002J3X4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Settings use, and your device receives a data packet not encrypted with the WEP keys, the data is discarded. In an ad-hoc network, all devices must use the same WEP key. Select WLAN security settings and from the following: • WEP key in use - Select the desired WEP key. • Authentication type - Select Open or Shared. • WEP key settings - Edit the settings for the WEP key. • WPA/WPA2 - Select EAP (Extensible Authentication Protocol) or Pre-shared key (a secret key used for device identification). • EAP plug-in settings - If you selected WPA/ WPA2 > EAP, select which EAP plug-ins defined in your device to use with the access point. • Pre-shared key - If you selected WPA/WPA2 > Pre-shared key, enter the shared private key that identifies your device to the WLAN to which you connect. WEP key settings In an ad-hoc network, all devices must use the same WEP key. Select WLAN security settings > WEP key settings and from the following: • WEP encryption - Select the desired WEP encryption key length. • WEP key format - Select whether you want to enter the WEP key data in ASCII or Hexadecimal format. • WEP key - Enter the WEP key data. 802.1x security settings Select 802.1x as the WLAN security mode. 802.1x authenticates and authorises devices to access a wireless network, and prevents access if the authorisation process fails. Select WLAN security settings and from the following: © 2009 Nokia. All rights reserved. WPA security settings Select WPA/WPA2 as the WLAN security mode. Select WLAN security settings and from the following: • WPA/WPA2 - Select EAP (Extensible Authentication Protocol) or Pre-shared key (a secret key used for device identification). • EAP plug-in settings - If you select WPA/WPA2 > EAP, select which EAP plug-ins defined in your device to use with the access point. • Pre-shared key - If you select WPA/WPA2 > Preshared key, enter the shared private key that identifies your device to the WLAN to which you connect. • WPA2 only mode - To allow both TKIP and AES (Advanced Encryption Standard) encryption, select Off. To allow AES only, select On 159