Nokia N82 Nokia N82 User Guide in English - Page 150
Packet data settings, Security settings for WEP, Security settings for 802.1x and WPA/WPA2
UPC - 758478012468
View all Nokia N82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Settings encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them. ● WPA2 only mode - Only WPA2 enabled devices are allowed to establish a connection in this mode. To enter the settings for the selected security mode, select WLAN security settings. Security settings for WEP Advanced WLAN settings Select Options > Advanced settings and from the following: ● WEP key in use - Select the wired equivalent privacy (WEP) key number. You can create up to four WEP keys. The same settings must be entered on the WLAN access point device. ● Authentication type - Select Open or Shared for the authentication type between your device and the WLAN access point device. ● WEP key settings - Enter WEP encryption (length of the key), WEP key format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected format). Security settings for 802.1x and WPA/WPA2 ● WPA/WPA2 - Select the means of authentication: EAP to use an extensible authentication protocol (EAP) plug-in, or Preshared key to use a password. Complete the appropriate settings: ● IPv4 settings - Enter the IP address of your device, the subnet IP address, the default gateway, and the IP addresses of the primary and secondary DNS servers. Contact your internet service provider for these addresses. ● IPv6 settings - Define the type of DNS address. ● Ad-hoc channel (only for Ad-hoc) - To enter a channel number (1-11) manually, select User defined. ● Proxy server address - Enter the address for the proxy server. ● Proxy port number - Enter the proxy port number. Packet data settings Press , and select Tools > Settings > Connection > Packet data. ● EAP plug-in settings - Enter the settings as The packet data settings affect all access points your service provider instructs. using a packet data connection. ● Pre-shared key - Enter a password. The ● Packet data connection - If you select When 150 same password must be entered on the WLAN available and you are in a network that supports access point device. packet data, the device registers to the packet