Nokia N82 Nokia N82 User Guide in English - Page 16
Settings, Access codes, Useful information - mobile phone
UPC - 758478012468
View all Nokia N82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Useful information States or www.latinoamerica.nokia.com/nsu in consecutive incorrect PIN code entries, the code Latin America. is blocked, and you need the PUK code to unblock Tip: To check the software version in your it. device, enter *#0000# in the standby mode. ● UPIN code - This code may be supplied with the USIM card. The USIM card is an enhanced version Settings of the SIM card and is supported by UMTS mobile phones. Your device normally has MMS, GPRS, streaming, and mobile internet settings automatically configured in the device, based upon your network service provider information. You may have settings from your service providers already installed in your device, or you may receive or request the settings from the network service providers as a special message. ● PIN2 code - This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device. ● Lock code (also known as security code) - This code (5 digits) can be used to lock the device to avoid unauthorised use. The factory setting for the lock code is 12345. To avoid unauthorised use of your device, change the lock code. Keep the new code secret and in a safe place separate You can change the general settings in your device, from your device. Try entering the code only such as language, standby mode, display, and once, if you forget the code. If the code you keypad lock settings. See "General entered is not correct, contact a Nokia Care point settings", p. 140. or your service provider for further instructions. ● Personal unblocking key (PUK) code and PUK2 Access codes code - These codes (8 digits) are required to change a blocked PIN code or PIN2 code, If you forget any of the access codes, contact your respectively. If the codes are not supplied with service provider. the SIM card, contact the operator whose SIM card is in your device. ● Personal identification number (PIN) code - This ● UPUK code - This code (8 digits) is required to code protects your SIM card against change a blocked UPIN code. If the code is not 16 unauthorised use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three supplied with the USIM card, contact the operator whose USIM card is in your device.