Oki C941dn C911dn/C931dn/C941dn Advanced User's Guide - Page 239
Using the access restriction function (IP filter) with IP addresses
View all Oki C941dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
Convenient print functions Matching Colors Using Utility Software Using the access restriction function (IP filter) with IP addresses You can manage access to the device using the IP address. Note zz The default device settings to [Disable] the [IP Filtering]. zz If the IP address is entered incorrectly, access to the device using IP protocols will be disabled. Be very careful during setup. 1 Log in as an administrator. Reference zz See "Logging in as an administrator" (P.223). 2 Click [Admin Setup]>[Network Setup]>[Security] tab. 3 Click [IP Filtering]. Setting the network from the web browser 4 [Enable] the [IP Filtering] in [STEP1]. 1 2 3 Note zz [Enable] IP filtering to disable all access from IP address hosts outside the range set in [STEP2]. 4 5 Set the IP address range in [STEP2]. Note zz Use the IP address to enter the range that authorizes the printing and setup. 5 zz For the IP address, use single-byte numbers separated by "." zz Disabled if the IP address entered is 0.0.0.0. zz If IP address ranges overlap, the settings for the address range with the highest [Priority] will be prioritized. Appendix zz Regardless of the specifications in Step 2, the administrator addresses that can be printed and set can be set in Step 3. 6 Click the [Address Range Bar Display/ Refresh]. Index Network Setup Checking and Changing Printer Settings Using the Control Panel To correct the IP address range, reenter the relevant IP address, and click the [Address Range Bar Display/Refresh] again. - 239 -