Oki C941dn C911dn/C931dn/C941dn Advanced User's Guide - Page 286

Convenient print functions Matching Colors Using Utility Software Table of setting items in the device setup screen 1 SMR settings Item 2 BG settings 3 Drum cleaning Transfer roller cleaning 4 High Humid Mode 5 Condensation control Narrow width paper speed Print mode 0 +1 +2 +3 -3 -2 -1 0 +1 +2 +3 -3 -2 -1 ON OFF Implement Mode 1 Mode 2 OFF ON OFF Normal Slow Normal Slow zz Shaded areas are factory-set values. Details Compensates for print results variation due to differences in the temperature and humidity environments, print density, and print frequency. Changes the settings if there is burr in the image. Compensates for print results variation due to differences in the temperature and humidity environments, print density, and print frequency. Change the value if the underlay is dark. Sets whether to implement drum cleaning before printing. The image quality may be improved. Implements cleaning of the transfer roller unit. Set if the paper curl after printing is conspicuous. Try mode 2 if reduced paper curl effects are not obtained after settings mode 1. Setting mode 1 or mode 2 will increase the warmup time and reduce the print speed. Sets whether or not to implement condensation control. If [ON], completing the printing of 1 page may take time. Sets the speed when printing on narrow paper. If there is toner peeling when there is friction between printed sheets, set to "Slow". Peeling may be cured. Setting Slow will reduce the print speed. Network Setup Checking and Changing Printer Settings Using the Control Panel Appendix Index - 286 -