Oki OKIPAGE14e English:OKIPAGE 14e User's Guide - Page 20
Using Recycled Print Media
View all Oki OKIPAGE14e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Guidelines for Transparencies and Labels • Always use manual feed. • Always use rear output when printing transparencies and adhesive labels. • Should be specifically made for laser printers or photocopiers. • Must be able to withstand heat of 200°C for 0.1 second. • Labels should cover the entire sheet carrier and adhesive must not be exposed to any part of the printer. • Use rear paper output to reduce heat exposure and curling. Using Recycled Print Media Recycled paper should be restricted to 20% to 35% Post Consumer Content and not exceed 50%. Paper must be relatively stiff and have minimum edge curl. Paper should be white and bright for maximum contrast. The surface should be smooth, clean, and stable electrically and dimensionally. Recycled paper used by OKI printers must be specifically denoted by the paper manufacturer to be for laser printers, or laser guaranteed or compatible. Using media outside these specifications may cause problems requiring service that will not be covered by OKI DATA warranty or service agreements. The following recycled paper has been tested and approved for use in OKI printers. • Weyerhaeuser, Lynx Opaque, 20% PCW, 20lb., 28 lb. and Laser Copy, 20 lb. • Union Camp Great White (Laser), 25% PCW, 20lb., 24lb. | E-20 OKIPAGE 14e