Olympus 2500L C-2500L Digital Camera Instructions (English) - Page 73

Processing Images on Personal Computer

Page 73 highlights

A Apple Macintosh Connecting to Personal Computers The Camedia C-2500L can be connected to a personal computer as follows. 1 Install CAMEDIA Master 1.11. For an explanation on installation, see the online manual. 2 Check that power to both the computer and camera is OFF. 3 Connect the PC connection cable into either the COM1 or COM2 serial port on the computer. RS-232C PC serial cable A Apple Macintosh: Connect the conversion connector for Macintosh to the printer port or Conversion connector for Macintosh B DOS/V modem port on the computer. B DOS/V: E Connect the PC connection cable for DOS/V to the conversion con- nector for Macintosh connected to the serial port. Processing Images on Personal Computer D-SUB 9-Pin serial port C-2500L RS-232C PC serial cable 4 Open the camera's connector cover. 5 Connect the other end of the PC connection cable to the camera's 5 communication connector. To the computer 6 Set the camera's mode dial to . 7 Turn ON the power to the camera. Communications connector 6 8 Turn ON the power to the computer and start up CAMEDIA Master 1.11. NOTE • Using AC adaptor is recommended when connecting the camera to the computer. E-67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95

E-67
Processing Images on Personal Computer
E
6
5
To the computer
Communications connector
Connecting to Personal Computers
The Camedia C-2500L can be connected to a personal computer as fol-
lows.
Install CAMEDIA Master 1.11.
For an explanation on installation, see the online manual.
Check that power to both the computer and camera
is OFF.
Connect the PC connection cable into either the COM1 or COM2
serial port on the computer.
Apple Macintosh:
Connect the conversion connector for Macintosh to the printer port or
modem port on the computer.
DOS/V:
Connect the PC connection cable for DOS/V to the conversion con-
nector for Macintosh connected to the serial port.
Open the camera's connector cover.
Connect the other end of the PC connection cable to the camera's
communication connector.
Set the camera's mode dial to
.
Turn ON the power to the camera.
Turn ON the power to the computer and start up CAMEDIA Master
1.11.
8
7
6
5
4
B
A
3
2
1
A
B
RS-232C PC serial cable
D-SUB 9-Pin
serial port
C-2500L
Conversion connector
for Macintosh
RS-232C PC
serial cable
Apple Macintosh
DOS/V
NOTE
• Using AC adaptor is recommended when connecting the camera to
the computer.