Olympus 2500L C-2500L Digital Camera Instructions (English) - Page 91
Error code - c card error
![]() |
UPC - 050332295131
View all Olympus 2500L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Error code Control panel LCD monitor (no indication) Error The card compartment cover is left open. Insert a SmartMedia /CompactFlash memory card and Ȣ This display appears when no more pictures can be stored in the camera. The same display also appears in the following cases. • There is a file named Pxxx9999.jpg (or Pxxx9999.tif) in the 9990LYMP folder in the DCIM directory. (P. 78) • The card does not have enough capacity to create or modify a reservation file when you attempt to make a print CARD close the cover. reservation. ERROR (Or a 4-digit code appears in the shutter speed display area.) If the card is dirty, clean it with a tissue. Then, insert the card again or format it. If the card does not recover, it cannot be used. MEMO • If a card error occurs when using the SmartMedia card, remove the card and re-insert it. If the error recurs, refer to the countermeasures above and take appropriate action. NO CARD UNFOR- • There is no card in the camera. Insert a card. • Switch between SmartMedia and CompactFlash. If a card error occurs when using the CompactFlash card, the card may not have been inserted all the way into the slot. Open the card cover, remove the card and re-insert it. If the error recurs, refer to the countermeasures above and take appropriate action. • Due to the difference in cluster size between SmartMedia MATTED The card is not formatted correctly. and CompactFlash cards, the following problems may CARD Re-format the card in the camera. occur during the all-image copy operation between WRITE- Note that re-formatting results in the loss of all data stored on the card. SmartMedia and CompactFlash cards (even when the card sizes are identical). When you attempt to execute the all-image copy operation E PROTECT The folder may be set as read only between a fully recorded card and a blank card, "CARD or a write-protect adhesive seal may FULL" may be displayed and the all-image copy operation be attached to the SmartMedia will not be available. In this case, replace the copy destina- Miscellaneous card. If neither of these is the case, the camera may automatically override writing and erasing on the card because of a failure in the card itself. Even if this is the case, however, it is still possible to view the images stored on the card. We rec- tion card with another card having larger capacity and retry the all-image copy operation. • Due to the difference in cluster size between SmartMedia and CompactFlash cards, the number of pictures that can be stored on newly formatted cards may vary depending on the card type (even when the card sizes are identical). Also, in the case of CompactFlash cards, the size indication on the card may differ from the actual capacity, so the ommend that you download the number of storable pictures per card can vary. NO PIC- images to a PC. TURE There is no image in the card. (no indica- (There is no data to display. ) tion) Ȣ No more photograph can be taken because the number of remaining pictures is 0. Replace the Smart Media, erase unwanted images, or transfer the data to a PC and erase CARD FULL all the data in the SmartMedia. Ȣ Switch the card with another one. Or replace the media. Or transfer the images to a comput- (no indica- er and delete all images. tion) Error in the current display. Other CAN NOT operations are possible. OPEN FILE This image cannot be opened with the C-2500L. Images photographed with a differ- ent digital camera should be viewed using the same camera. If the card is dirty, clean it with a tis- sue. Then, insert the card again or format it. If the card does not recov- E-85
![](/manual_guide/products/olympus-2500l-c2500l-digital-camera-instructions-english-50e73ef/91.png)