Olympus DS-2400 DS-2400 Instructions (English) - Page 14
Power Supply, Power Save Mode, Power Save
UPC - 050332165335
View all Olympus DS-2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Power Supply/Power Save Mode Power Supply When the recorder is not being used, turn the power off to reduce battery consumption to a minimum. Even if the power is turned off, existing data, mode settings, and clock settings will be maintained. 1 Turning On the Power While the recorder's power is off, slide the POWER/HOLD switch in the direction indicated by the arrow. The display will turn on, and after [System Check] appears, the power will be turned on. The resume function will bring the recorder back to the stop position in memory before power was turned off. Turning Off the Power Slide the POWER/HOLD switch in the direction indicated by the arrow for 0.5 seconds or longer. The display shuts off and the power will be turned off. The resume function remembers the stop position before the power is turned off. Power Save Mode (Power Save) When the recorder is ON but not in use for 10 minutes, by default, it will switch to power save mode automatically. To reactivate the recorder again, operate any button or the slide switch. Power Save Setting You can set the time to enter Power Save mode from among [5 minutes.], [10 minutes.], [30 minutes.], [1 hour], and [Off]. To exit power save, press any button. The [Power Save] setting can be changed from the Menu. For more details, refer to "Menu List" (☞ P.33) and "Learning to Use the Menu" (☞ P.35). Power Save 5 minutes 10 minutes 30 minutes 1 hour Off BACK EXIT 14