Olympus LS-10 LS-10 Instructions (English) - Page 10

Getting Started Notes • Manganese battery may not be used in this recorder. • This recorder cannot charge rechargeable batteries. • Be sure to turn off power of the recorder before 1 replacing the batteries (☞ P.11). Unloading the batteries while the recorder is in use may corrupt the file. If you are recording into a file and the batteries run out, you will lose your currently recorded file because the file header will not be able to close. It is crucial to change the batteries once you see only one Hash mark in the battery icon. • If it takes longer than 15 minutes to replace the dead battery or if you take the battery in and out repeatedly at short intervals, you may have to reset the time when you have loaded a fresh battery (☞ P.12). • Remove the batteries if you are not going to use the recorder for an extended period of time. • When playing a voice/music file, the recorder may be reset due to the reduction of the voltage output of the battery depending on the volume level even if [ ] is displayed in the battery indicator. In this case, lower the volume of the recorder. 10 Inserting Batteries Using the AC Adapter Plug the AC adapter (optional) into a household power outlet and connect the power plug to the recorder's power connector (DC 5V). Always turn the recorder's power off before connecting. If the AC adapter is plugged in while recording using batteries, it may not be possible to play back the voice data being recorded. • Check the Olympus website regarding AC adapters which can be used with this recorder. To the power jack fWarning • Always turn the recorder's power off before connection or disconnection. • When the AC adapter is not in use, disconnect the power supply plug from the power outlet. • Use only the correct power supply voltage as indicated on the adapter. • Do not use the AC adapter when connecting the recorder to the USB port.