Olympus LS-10 LS-10 Instructions (English) - Page 33
Press the, button to select, button.
UPC - 050332162358
View all Olympus LS-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3 Press the 2 button to select [All Erase]. 4 Press the `/OK button. • The display changes to [All Erase!] and erasing will start. [Erase Done] is displayed when the files are erased. Erasing Notes • An erased file cannot be restored. When an SD Card is inserted in the recorder, be sure to confirm the recording media as either the [Built-in Memory] or the [SD Card] so that there is no mistake (☞ P.34, P.39). • When attempting to perform operations such as rewriting the contents of an SD Card in cases where the card has been write protected, [SD Card Locked] will appear. The playback operation can be performed, but the write protection must first be turned off when overwriting the contents on the card (☞ P.15). 3 • The locked files and files set as read-only cannot be erased (☞ P.34, P.39). • If an action is not selected within eight seconds on the [Cancel], [Erase] or [All Erase] screens, the recorder will return to stop status. • Never perform operations such as the following while processing, as they may damage the data. In addition, replace the batteries with two new ones in order to ensure that the batteries will not run out while processing. 1 Turning off the power while processing. 2 Removing the batteries while processing. 3 Remove the [SD Card] during processing when it is being used as the recording media. Performing any of these operations may damage the data. • You cannot delete folders through the recorder. About Playback 33