Olympus WS-600S WS-710M Instructions (English) - Page 25
About recording
UPC - 050332175716
View all Olympus WS-600S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
About recording Recording Before starting recording, select a folder between [&] to [*]. These five folders can be selectively used to distinguish the kind of recording; for example, Folder [&] might be used to store private information, while Folder ['] might be dedicated to holding business information. STOP (4)button REC (s) button a Recording mode b Remaining memory bar indicator c Elapsed recording time d Remaining recording time e Level meter (change according to the recording level and recording function settings) • [Rec Mode] cannot be changed in 2 the recording standby mode or while recording. Configure this while the recorder is stopped (☞ P.47, P.49). 3 Press the STOP (4) button to stop recording. • [¶] will appear on the display. Recording For WS-710M/WS-700M: • In modes other than [Recorder] mode, [Cannot record in this folder] will appear if you press the REC (s) button. Only record after you have set the mode to [Recorder] mode on the [Home] display (☞ P.21). • With the WS-710M, you can record FM radio in [FM Radio] mode (☞ P.46). 1 Select the recording folder (☞ P.22 to P.24). 2 Press the REC (s) button to start recording. • The recording indicator light glows and [´] will appear on the display. • Turn the microphone in the direction of the source to be recorded. a b c d e f f File length Notes • To ensure that you do not lose the beginning of the recording, only record after confirming that the recording indicator light is lit and checking the mode indicator on the display. • When remaining recording time is less than 60 seconds, the recording indicator light starts flashing. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster. • [Folder Full] will appear when the recording cannot be made any further. Select on other folder or delete any unnecessary files before recording (☞ P.39). • [Memory Full] will appear when the memory is full. Delete any unnecessary EN files before recording any further (☞ P.39). 25