Olympus WS-600S WS-710M Instructions (English) - Page 54
Select, For WS-710M/WS-700M, For WS-600S
UPC - 050332175716
View all Olympus WS-600S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Menu setting method Menu setting method [Power]: This mode focuses more on lower sound registers. [Wide]: This mode has an even more expansive feel. [Natural]: This mode achieves natural bandwidth correction and acoustical field expansion. [Off]: Disables this function. • When [EUPHONY] is set to [Power], [Wide] or [Natural], slow/high speed playback will not function. To use these functions, set [EUPHONY] to [Off] (☞ P.36). • [EUPHONY] only works in [Music] mode. • When playing back using the built- in speaker, the EUPHONY function is 5 disabled. Voice Filter The recorder has a Voice Filter Function to cut low and high frequency tones during normal, fast, or slow playback, and enable clear audio playback. [On]: Enables the Voice Filter function. [Off]: Disables this function. For WS-710M, WS-700M only: • When [Voice Filter] is set to [On], [Noise Cancel] will not function. To use this function, set [Voice Filter] to [Off] (☞ P.53). • [Voice Filter] only works in [Recorder] mode. EN 54 Play Mode You can select the playback mode that fits your preference. For WS-710M/WS-700M: • Set to [Music] mode. Select the desired playback range: 1 Select [Play Area]. 2 Select [File], [Folder] or [All]. [File]: Selects the current file. [Folder] Selects the current folder. [All]: Selects all files in the internal memory. Select the desired playback mode: 1 Select [Repeat] or [Random]. [Repeat]: Sets to repeat playback mode. [Random]: Sets to random playback mode. 2 Select [On] or [Off]. [On]: Sets the playback range to be played back repeatedly or randomly. [Off]: Disables this function. For WS-710M/WS-700M: • Set to [Recorder] mode. For WS-600S: [File]: Stop after playing back the current file. [Folder]: Play files continuously in the current folder until the last file and stop. • In [File] mode, when the recorder comes to the end of the last file in the folder, [End] flashes for two seconds on the display and the recorder stops at the start of the last file.