Onkyo TX-RZ70 TX RZ Manual - En - Page 109
Selecting a source to play in ZONE 2, Adjusting the volume in ZONE 2, When ZONE 2 speakers are used
View all Onkyo TX-RZ70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Selecting a source to play in ZONE 2 1. While pressing the ZONE 2 HOLD button on the remote controller, press the input selector of the input you want to play in the separate room. To control on the main unit, press the ZONE 2 button on the main unit and then within 8 seconds press the input selector button of the input you want to play in the separate room. 2 1 Adjusting the volume in ZONE 2 Playback When ZONE 2 speakers are used 1. While pressing the ZONE 2 HOLD button on the remote controller, adjust with the volume buttons. To control on the main unit, press the ZONE 2 button on the main unit and then within 8 seconds adjust with the MASTER VOLUME dial. 2 1 • Information of a connected device can be displayed on the TV screen in the separate room. While pressing and holding the ZONE 2 HOLD button on the remote controller, press the " " button. When using an Integrated amplifier in the separate room 1. Use the volume dial on the integrated amplifier to adjust the volume. When using an integrated amplifier that does not have a volume control, adjust using the same procedure described in "When ZONE 2 speakers are used". • When connecting an integrated amplifier that does not have a volume control, in the Setup menu, set "Multi Zone" - "Zone 2" - "Output Level" ( →p158) to "Variable". If you do not set this, the volume output will be very loud and there is a danger of damage to the integrated amplifier, speakers, etc. • You can also adjust the sound quality of a power amplifier connected in a separate room. After pressing the ZONE 2 button on the main unit, within 8 seconds press the TONE button, and adjust by pressing the - and + buttons. 109