Onkyo TX-RZ70 TX RZ Manual - En - Page 91

Quick Menu You can quickly set convenient features such as adjusting sound quality. Quick Menu HDMI Audio Room EQ Level Discrete Audio Path Mode HDMI Out A/V Sync Audio Return Channel BD/DVD You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu. Select the item with the cursors / of the remote controller, and press the ENTER button to confirm your selection. Use the cursors to change the settings. • To return to the previous screen, press . • To exit the settings, press Q. Note • When the input signals are ones that need a high bandwidth, such as 8K signals, the Quick Menu may not be displayed. Playback „ HDMI Discrete Audio Path Mode: You can make the HDMI IN 1 jack exclusively for audio to improve sound quality. Not that when this is set to on, the output of video signals will stop and there will be no display on the TV screen. • The display will appear on the TV screen when you press , but the video signal out is stopped again when you press again. HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN", "SUB", and "MAIN+SUB". A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. The setting can be set for each input. • It cannot be set if the listening mode is Pure Audio or Direct. Audio Return Channel: You can enjoy the sound of the HDMI-connected ARCcompatible TV through the speakers connected to the unit. Select "On" when listening to the audio of TV using the speakers of this unit. Select "Off" when the ARC function is not used. 91