Onkyo TX-RZ70 TX RZ Manual - En - Page 127

3. Audio Adjust 4. Source 5. Hardware 6. Multi Zone 7. Miscellaneous 1. Multiplex/Mono 2. Dolby 3. DTS/IMAX 4. LFE Level 5. Volume 1. My Input Volume 2. Name Edit Audio Select Video Select 1. HDMI 2. Network 3. Bluetooth 4. Power Management 5. 12V Trigger 6. Works with SONOS 1. Zone 2 2. Zone 3 3. Remote Play Zone 1. Tuner 2. Remote ID 3. Firmware Update 4. Initial Setup 5. Lock 6. Factory Reset Change the settings of multiplex audio playback. Change the setting of when Dolby signals are input. Change the setting of when DTS signals are input. Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals. Change the Volume settings. Set a volume value for each input selector. Set an easy name for each input. Select the prioritized input terminal when multiple audio sources are connected to one input selector. When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from which video is displayed on the TV. Change the settings for the HDMI functions. Change the settings for the Network functions. Change the settings for the BLUETOOTH function. Change the settings for the power-save function. Change the settings for 12V TRIGGER OUT jack. Change the settings to connect with the Sonos Connect. Change the settings for Zone 2. Change the settings for Zone 3. Change the settings for remote play. Change the settings for Tuner. Change the remote controller ID. Change the settings for Firmware Update. Make the initial setup from the setup menu. Lock the Setup menu so that the settings cannot be changed. All the settings are restored to factory defaults. Setup p142 p142 p143 p144 p144 p145 p145 p145 p146 p147 p149 p152 p154 p156 p156 p158 p158 p159 p160 p160 p160 p161 p161 p161 127