Onkyo TX-RZ70 TX RZ Manual - En - Page 156
V Trigger, Works with SONOS, Input Selector Default Value: Off
View all Onkyo TX-RZ70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
5. Hardware 5. 12V Trigger Set when outputting the control signal (maximum 12 V/100 mA) through the 12V TRIGGER OUT jack. You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack. Zone (Default Value: Main) Set which zone to output the 12V trigger when playing. If you select "All", then the 12V trigger is output to all zones that are playing. Off Main Zone 2 Zone 3 All When the control signal is not output When controlling the power of external devices linked to the input selection in the main room When controlling the power of external devices linked to the input selection in ZONE 2 When controlling the power of external devices linked to the input selection in ZONE 3 When controlling the power of external devices linked to the input selection in the main room, in ZONE 2 or in ZONE 3 Setup 6. Works with SONOS Change the settings to connect with the Sonos Connect. (SONOS-1/SONOS-2/SONOS-3) Input Selector (Default Value: Off) Select the input selector to which the Sonos Connect is connected. • Selecting "Off" disables the interlock function with Sonos. Connected Device (Default Value: -) Displays the Sonos Connect connected to the same network as the network of this unit. Press the ENTER button to select the connected Sonos Connect. • Products (e.g. Play:3 unequipped with an output terminal) other than the Sonos Connect are also displayed in the device list and selectable. In that case, when playback on the Sonos side starts, the input is switched, however, audio is not output. Select the room name of the connected Sonos Connect. • Up to 32 devices can be displayed on the Sonos product list screen. If you cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. • To use this function, set "Input Selector" beforehand. 156