Onkyo TX-RZ70 TX RZ Manual - En - Page 140
EQ for Standing Wave, Speaker Virtualizer, Loudness Plus Default Value: On, Filter 1
View all Onkyo TX-RZ70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
2. Speaker Loudness Plus (Default Value: On) • This cannot be selected when either of the slots is selected with "Dirac Live" ( →p93). When this is set to "On", you can enjoy even subtle nuances of audio expression at low volume. This is only available when the THX listening mode is selected. THX Loudness Plus THX Loudness Plus is a new volume control technology mounted on THX Ultra and THX Select-certified receivers. With THX Loudness Plus, home theater audience can experience the rich details of surround sound at any volume level. If the volume is turned down below the reference level, elements of sound in a certain range are lost or the sound is perceived differently by the listener. THX Loudness Plus compensates for the tonal and spatial shifts that occur when the volume level is reduced, by intelligently adjusting the levels of the surround channels and their frequency response in the environment. This enables users to experience the true impact of soundtracks regardless of the volume setting. THX Loudness Plus is automatically applied when listening in any THX listening mode. In the newly developed THX Cinema, THX Music and THX Games modes, the optimum THX Loudness Plus setting is applied according to the type of content. Setup 8. EQ for Standing Wave This controls the affect of the standing waves that occur when sound waves reverberating off obstacles such as walls interfere with the original sound waves. Filter 1 (Default Value: 0.0dB) Filter 2 (Default Value: 0.0dB) Filter 3 (Default Value: 0.0dB) 1. After selecting the Filter to adjust from "Filter 1" to "Filter 3" with / , press ENTER. 2. Select the frequency with / , then adjust the attenuation with / . The frequency can be selected between "63 Hz" and "250 Hz". Attenuation can be selected between "0.0 dB" and "12.0 dB" (0.5 dB intervals). 9. Speaker Virtualizer The Speaker Virtualizer function can be switched between On and Off. Speaker Virtualizer (Default Value: On) On Listening modes such as T-D that have virtual speaker effects can be selected. Off Listening modes such as T-D that have virtual speaker effects cannot be selected. 140