Panasonic AG-UX90 AG-UX90 Operating Instructions - Page 120
Setting the external output resolution, To use an AV cable for external output
View all Panasonic AG-UX90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Setting the external output resolution Change the setting for outputting images to an external monitor or other external device (recorder, etc.). Select the menu. MENU : [OUTPUT SETUP] # [RESOLUTION] # desired setting [SYSTEM]/[1080p]/[1080i]/[DOWN CONV.] ≥ [SYSTEM] automatically sets the output resolution according to the setting in [REC FORMAT]. If the images are not output on the external device when the setting is [SYSTEM], switch to the method [1080p], [1080i] or [DOWN CONV.] which enables the images to be displayed on your external device. (Please read the operating instructions for the external device.) ≥ [DOWN CONV.] outputs images in standard picture quality. ∫ To use an AV cable for external output 1 Select the [AV OUT] menu. MENU : [DISP SETUP] # [AV OUT] # [ON] 2 Select the [RESOLUTION] menu. MENU : [OUTPUT SETUP] # [RESOLUTION] # [DOWN CONV.] ≥ In the following cases, the video and audio are not output from VIDEO OUT terminal and AUDIO OUT terminal: j When an HDMI cable is connected to this unit j [RESOLUTION] is set to the settings other than [DOWN CONV.] (Unless [REC FORMAT] is set to [SA 480/59.94i] ) ≥ When [REC FORMAT] is set to [SA 480/59.94i], [RESOLUTION] is fixed to [SYSTEM]. ≥ [RESOLUTION] cannot be set during Freeze Frame. (l 87) ≥ Images may not be displayed on the external device for several seconds in some cases, such as when changing between scenes. About external output resolutions The external output resolution varies depending on the [RESOLUTION] setting and connected terminal. ≥ When [RESOLUTION] is set to [SYSTEM], the external output resolution varies depending on the picture size and frame rate in [REC FORMAT]. - 120 -