Panasonic AG-UX90 AG-UX90 Operating Instructions - Page 86

Focus Assist 2 ≥ Register "Focus Assist 2" to a USER button. (l 80) You can set the Focus Assist. (l 57) ≥ You can set the Focus Assist method in [FOCUS ASSIST 2] in the [SW SETUP] menu. ≥ When [FOCUS ASSIST 1] in the [SW SETUP] menu is set to [BOTH], the USER button is disabled. Recording Check ≥ Register "Recording Check" to a USER button. (l 80) Approximately 2 seconds at the end of the video recorded last can be played back. It will return to recording screen once the playback is completed. ≥ Playback operation is not possible during the Recording Check. ≥ Recording Check is not possible in following cases: j When the unit is turned on/off j When the THUMBNAIL button is pressed j When the SD card is inserted/removed j When the setting of [REC FORMAT] is changed (l 148) j Set [2 SLOTS FUNC.] to [SIMULTANEOUS]. (l 162) j PRE-REC is used (l 92, 165) j During the Interval Recording (l 163) j During Freeze Frame (l 87) Last Scene Delete ≥ Register "Last Scene Delete" to a USER button. (l 80) The motion picture recorded last can be deleted. Deleted scenes cannot be restored. 1 Press USER button or touch USER button icon in the recording screen. 2 Touch [YES]. ≥ It will return to recording screen without deleting by touching [NO]. ≥ Last Scene Delete is not possible in following cases: j When the unit is turned on/off j When the THUMBNAIL button is pressed j When the SD card is inserted/removed j When the setting of [REC FORMAT] is changed (l 148) j Set [2 SLOTS FUNC.] to [SIMULTANEOUS]. (l 162) j During the Interval Recording (l 163) - 86 -