Panasonic AG-UX90 AG-UX90 Operating Instructions - Page 162

Recording Setup All default settings are indicated with underlined text. MENU : [RECORD SETUP] # desired setting [MEDIA SELECT] Card slot can be selected separately to record motion pictures. (l 42) [SD CARD 1]/[SD CARD 2] [2 SLOTS FUNC.] You can set relay/simultaneous recording. ≥ Insert SD cards to card slot 1 and card slot 2. [OFF]: [RELAY REC]*1: [SIMULTANEOUS]*2: Cancel the setting. Set the relay recording Set the simultaneous recording *1 This function is not available in the following cases: j In Variable Frame Rate Mode (l 92) j During the Interval Recording (l 163) *2 This item is not available when different types of SD cards (SDHC Memory Card/SDXC Memory Card) are used. ∫ Relay recording This is simple Relay Recording. It is possible to continuously record on the SD card in the other card slot even when the available capacity of the SD card runs out during the recording.           1 Slot 1 2 Slot 2 3 Recording is started 4 Recording is paused A Recording B The card slot used for recording is switched automatically. C Replace the SD card with a recordable one. ≥ RELAY is displayed beside the display of the SD card selected as the recording destination of motion pictures in [MEDIA SELECT] (l 42). When the recording media is switched and Relay Recording starts, RELAY will disappear from the location and instead be displayed beside the other SD card display. ≥ Even after switching of the recording media, you can replace the SD card that ran out of space with a new one and record the motion picture onto three or more SD cards. Since it may take a - 162 -