Panasonic AG-UX90 AG-UX90 Operating Instructions - Page 94

≥ You can also enable/disable Variable Frame Rate Mode or change the frame rate using the menu. j [VFR MODE] (l 164) j [FRAME RATE] (l 164) ≥ Variable Frame Rate Mode is set to [OFF] in following cases: j When the [REC MODE] or [REC FORMAT] setting is changed to a setting that does not support Variable Frame Rate Mode ≥ The following functions are canceled: j Flash band compensation (l 91, 151) j Relay recording (l 162) j Interval Recording (l 163) j PRE-REC (l 92, 165) j Hybrid Optical Image Stabilizer (l 51) j Area Mode (l 88) j Digital Zoom (l 85) j Custom AF function (l 55) j i.Zoom (l 50) j Freeze Frame (l 87) ≥ It is not possible to set a shutter speed slower than the set frame rate. Example: When [REC FORMAT] is set to [FHD 1080/29.97p 50M], if you set the frame rate to 30 fps, the shutter speed cannot be adjusted to a value slower than 1/30. ≥ [BLACK FADE] and [WHITE FADE] are disabled. (l 84) ≥ Even if you press the recording start/stop button as soon as recording has started, it may take some time until the recording stops. ≥ The screen may momentarily black out when the frame rate is changed in Step 2. ≥ When using Variable Frame Rate (VFR) Mode with a low frame rate setting, this unit may not be able to keep up with changes in the image. In such a case, set the iris, focus and White Balance mode to manual settings. ≥ The maximum continuous recordable time for one scene in Variable Frame Rate Mode varies depending on the set frame rate. Recording stops when a certain time has elapsed since the start of the recording, and restarts automatically a few seconds later. j With undercrank recording: 10 hours j When recording with the same frame rate as the frame rate in [REC FORMAT]: 10 hours j With overcrank recording, the recordable time becomes shorter than 10 hours depending on the ratio between the frame rate for [REC FORMAT] and variable frame rate setting. Example: When [REC FORMAT] is set to [FHD 1080/29.97p 50M] Variable frame rate setting 2 fps 30 fps 60 fps ≥ "h" is an abbreviation for hour. Maximum continuous recordable time for one scene 10 h 5h Fast Zoom ≥ Register "Fast Zoom" to a USER button. (l 80) You can use Fast Zoom when operating the zoom with the zoom lever. (l 50) i.Zoom ≥ Register "i.Zoom" to a USER button. (l 80) You can enable/disable i.Zoom. - 94 -