Panasonic AG-UX90 AG-UX90 Operating Instructions - Page 189

Display Description Behavior and cause THIS SCENE CANNOT BE COPIED. This is displayed when one or more of ≥ Copy scenes except for the scenes you are trying to copy the ones that cannot be cannot be played back on this unit. copied. Cannot copy: contains recordings from other devices. This is displayed when a copy-related operation involving a scene recorded with another device is performed. ≥ Copy only the scenes recorded with this unit. CANNOT SELECT BY DATE ANY MORE. This is displayed when no more scenes can be selected after the maximum limit is reached, for example. ≥ After finishing copying, reselect the desired dates. CANNOT COPY - DATE CAPACITY IS FULL. CANNOT COPY - THE NUMBER OF SCENES HAS REACHED MAXIMUM. This is displayed when no more scenes can be copied after the maximum limit set by applicable standards is reached, for example. ≥ Use an SD card with enough recordable space. COULD NOT COPY SOME SCENES. This is displayed when some scenes cannot be copied after the maximum limit set by applicable standards is reached, for example. COPY FAILED. PLEASE CHECK THE CARD. An error has occurred while accessing ≥ Check the SD card. the SD card. Cannot copy due to error This is displayed when an attempt to on media. access the SD card in this unit fails. Cancel card lock to write information. The write-protect switch of the copy destination SD card is locked. ≥ Unlock the write-protect switch of the SD card. During wireless LAN connection Display Connection to wireless access point failed. Description This is displayed when a connection to the wireless access point cannot be established. Behavior and cause ≥ Check the settings for [WIRELESS SETUP] and [Wireless LAN setup], and the settings on the wireless access point. - 189 -